Production Vessels

Oilfield Production Vessels
Dura-Strong Fabrication can quickly produce low cost, high quality ASME vessels to fit your precise production requirements.  We specialize in ASME Section VIII, Div. 1 production vessels up to 54″ outside diameter and 20′ in length. We work in a wide variety of pressures from atmospheric up to 10,000 psi.  We also have an onsite atmospheric furnace that provides high temperature heat-treating for tempering, normalization, and annealing applications. These are finished vessels with connections, valves, controls and instrumentation to your specifications. See below for descriptions of the production vessels we can build for you.

Measurement and Allocation Packages:

1440 psi 4-phase Allocation and Measurement Skid
A skidded or trailer mounted package that provides everything needed to separate and measure flow at the wellhead. Once measured, the separated flows can be recombined for delivery downstream to a central gathering location or storage battery. An additional feature, the “outflow commingle” allows you to control what goes back into the flow. Collected digital measurement data can be uploaded in real-time and/or stored on-board for later retrieval.

 

2, 3, and 4 Phase Horizontal Production Separators:

720 psi 3-Phase Horizontal Production Separator
Designed to separate the well flow into its constituent parts, our production separators are efficient, durable, and capable. Our 4 phase production separator traps residual sand in addition to the usual water, oil, and gas constituents.

 

2 and 3 Phase Vertical Production Separators:

150 psi Vertical 2-phase Production Separator

Vertical separators provide a small footprint and deliver efficient separation at your well site or gathering station.  Whether you’re looking for low pressure, low volume vertical separators, like a 54″ x 20′ x 150 psi vertical vessel or large, mid-range pressure vessel like a 48″ x 15′ x 750 psi unit, we can fabricate and deliver quickly and affordably.

 

Debris Catcher & Sand Trap Combo Units:
Due to complex multi-stage drill-outs, residual debris can be a long-term problem at many well sites. Our combination debris catcher and sand trap units can capture largTriplete debris items efficiently and safely while also trapping residual sand and sediments. These cost-effective units provide an added layer of protection for downstream equipment. Combo units are available in a wide range of pressures and sizes.

Sand Separators:

Production Sand Separator with L skid

If residual sand and sediment is an issue at your site, our production sand separators provide a solution that is easy to implement, safe, and affordable. Available in a wide variety of sizes and pressures, our sand traps help prevent costly shut-ins due to sanding-off or washed equipment. Skidded or pedestal mounts available.

Slug Catchers:Slug catcher
Available in a wide a variety of sizes and maximum pressures, Dura-Strong scrubbers efficiently remove residual light liquids such as condensate or water from your gas flow. Gas scrubbing is recommended for all instrumentation and control (pneumatic) usages as well as upstream for onsite generators or flare systems.

Scrubbers:
Available in a wide a variety of sizes and maximum pressures, Dura-Strong scrubbers efficiently remove residual light liquids such as condensate or water from your gas flow. Gas scrubbing is recommended for all instrumentation and control (pneumatic) usages as well as upstream for onsite generators or flare systems.

(C)2015, All rights reserved by Dura-Strong Fabrication, LLC.